20um Thick Carbon Coated Aluminum Foil for supercapacitor application with both side
coating of CAW1
1.aluminum foil Thickness:20um,18
3.both side coating:0.3~1.5um,1um
for electric vehicles and energy storage(LFP.LMO.NCM.NCA.LNM.LTO)
2. 3C Li-lon battery (LCO.NCM):
Lithium-ion batteries for 3C productions(LCO.NCM)
3. Super capacitor
4. Lithium-ion super capacitor
5. Li-lon battery for electric vehicle
”CAW1 ”is one of the highest-quality “CA” series product, it took
five years for the research and development of the product , Nano
graphite with excellent performance is produced and used as raw
material for the functional coating. Due to high conductivity and
small size of the Nano graphite ,the obtained functional coating is
very thin and highly conductive. The thickness of the functional
coating is about 400mm,resulting in improvement of both energy
density and power density .we have independent intellectual
property for this technology.
Physical and Chemical properties of CAW1 products.
|Peeling Strength||2.0N||2.5 N||2.8N||2.8N|
|Corrosion resistance||No exfoliation||No exfoliation||No exfoliation||No exfoliation|
The product type,quantity ,production date and Origin place etc,
are indicated on the package.
Products usage and storage:
. Use the product in the workshop with humidity of ≤20%RH and a high
. Store the product below 35℃, do not open the vacuum package before
use .after use ,the left product should be dried at 40-60℃ for 2
hours under vacuum ,then kept in the cabinet filled with nitrogen
at room temperature.
. The product can be stored under vacuum package for one year at
ambient temperature and moisture without direct sun. Once the
vacuum package is opened, the product can be kept under vacuum
cabinet for at most one month.
1.Use the product under the temperature of 20-25℃ and humidity of
2.The coating layer is highly Hydrophilic, handle it under personal
3.Avoid using the product under dust, The dust purification should
be over 0.1M.
4. Avoid any collisions against hard materials. Handle the product
5.This product is developed by our company for the application in
batteries , if application in other fields, please contract with us
for it .
1.We can provide free sample.
2. Coating thickness can as per your request,Max.coating thickness
3.Welcome to visit our factory
4.we can provide maetrical COA and MTC .
Productsion photo show: